2. COMPONENTS:
2400AT
4
3. BEFORE OPERATION
Remove the Model 2400AT from its box and place it on a firm surface for set-up. Remove
all packaging from the unit including the packaging on the card feed slot located on top
of the unit. Once all packaging is removed, you can plug your Model 2400AT into any
110 VAC outlet. Using the key provide with the unit, open the top cover to access the
set-up buttons and to change the ribbon when necessary.
4. SETTING UP YOUR MODEL 2400AT
Use the key included with your Model 2400AT to remove the top cover.
4.1 SETTING THE YEAR - 01
6. Continue to next feature setup or move the SETUP slide to
the right to complete and exit setting mode.
Time cards
Time card rack
8. TROUBLE SHOOTING