Recording From Another Vcr Or Camcorder; Using The Assemble Edit Function - Samsung DVD-V6500K User Manual

Recording from Another
VCR or Camcorder
You can copy a cassette to your DVD-VCR from another
video source, such as another VCR or a Camcorder etc.
• It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in any
form without the permission of the owners of the
corresponding copyright.
1 Connect the output jack of your External
devices to the LINE IN 1 on the rear of the
DVD-VCR.
2 Insert a blank cassette in your DVD-VCR.
Insert the pre-recorded cassette in the other video
3
source (VCR or Camcorder etc).
4 Press the INPUT SEL. button to select the
appropriate input on your DVD-VCR:
• LINE IN 1 for the audio/video input
5 Start playing back the cassette to be copied.
Hold down the REC (
6
recording on your DVD-VCR.
7 When you have finished recording, press the
I
button on both VCR and DVD-VCR.
• If you wish to view the cassette being copied, your
DVD-VCR must be connected as usual to the
television (refer to page 11 for further details).
20 - English
G
) button for a while to start
Using the Assemble
Edit Function
This function allows you to start a new recording at a
specific position on the cassette while
maintaining a very smooth scene change.
Insert the cassette to be edited in your DVD-VCR.
1
Press the √
ll
2 button to start playback.
When you reach the position from which you wish
3
to start the new recording, press the √
4 Press the F.ADV/STEP button as often as
necessary to advance frame by frame, until the
exact recording position is located.
5 While the DVD-VCR is in still mode, hold down the
G
REC ( ) button for a while to activate the
assemble edit function.
6 Select the source from which you wish to record
by pressing:
• The INPUT SEL. button for the LINE IN 1
input source.
Press the √
ll
7 button to start recording.
When you have finished recording, press the
I
button.
ll
button.