Table of Contents
Advertisement
General
46mm)
58mm)
50mm)
2"
(
T
I
J
4/5'~
1 (
27/25" (
=1=
E
E
N
~
- c 0 -
T'
(178 mm)
E
E
,
-~
I.
62/3" (170 mm)
.1
72/5" (188 mm)
Power supply voltage:
14.4 VDC (10.8 to 15.6 V allowable), negative
ground
Pre-Amp output voltage:
2.0 V (CD play mode: 1 kHz, 0 dB, 10 kO load)
Fuse: 15A
Dimensions of the main unit (W x H x D):
72/5 x 27/25 x 712/25 in.
(188 x 58 x 190 mm)
Weight of the main unit: 2.98 lb. (1.35 kg)
Dimensions of the remote control unit (W x H x D):
1 2/3 x 2/5 x 4 2/5 in.
(43 x 11 x 113 mm)
Weight of the remote control unit:
1.16 oz. (36 g) (including battery)
System: Disc digital audio system
Frequency response: 20 HZ-20 kHz
Signal/noise ratio: >75 dB
Total harmonic distortion: Less than 0.1% (1 kHz)
Channel separation: >60 dB
MP3IWMA mode
MP3 sampling rate: 8 kHz to 48 kHz
MP3 bit rate: 8 kbps to 320 kbps / VBR
WMA bit rate: 8 kbps to 320 kbps
Logical format: ISO 9660 level 1,2
Joliet or Romeo file system
CD
AM tuner
Frequency range: 530-1,710 kHz
Usable sensitivity (S/N=20 dB): 30 dBfJ
FM tuner
Frequency range: 87.9-107.9 MHz
Usable sensitivity: 8 dBIJ
Frequency response: 30 HZ-15 kHz
Stereo separation: 30 dB (1 kHz)
Signal/noise ratio: >55 dB
USB
Specification: USB 1.0/2.0
Playable audio format:
MP3 (.mp3): MPEG 1/2/Audio Layer-3
WMA (.wma): Ver 7/8/9.1/9.2
Notes:
•
Specifications comply with JEITA Standards.
•
Specifications and design are sUbject to change
without notice for further improvement.
Audio amplifier
Maximum power output:
180 W (45 W x 4)
Speaker impedance: 4 0 (4 to 8 0 allowable)
Input
Audio input sensitivity:
High: 320 mV (at 1 V output)
Mid: 650 mV (at 1 V output)
Low: 1.3 V (at 1 V output)
(input impedance 10 kO or greater)
Aux-in level:
~2
V
Power output:
18 W x 4 Channels RMS (4 0 at
14.4 V
~
1% THD+N)
Signal to noise ratio:
76 dBA (reference: 1 W into 4 0)
20
CZ200
Advertisement
Table of Contents
