Error Display - Clarion CZ200 Owner's Manual & Installation Manual

Cd/usb/mp3/wma receiver
Table of Contents

Advertisement

USB devices
Problem
Cause
Measure
The USB device has been
Reversing the connection direction of the USB
USB device cannot
inserted with wrong direction.
device, try it again.
be inserted.
The USB connector is broken.
Replace with a new USB device.
USB device is not
The USB device is damaged.
Disconnect the USB device and reconnect.
If
the
recognized.
device is still not recognized, try replacing with a
Connectors are loose.
different USB device.
No sound heard with
No MP3IWMA file is stored in the
the display "No File"
USB device.
Store these files properly in the USB device.
shown.
Sound skips or is
MP3IWMA files are not encoded
Use MP3IWMA files encoded properly.
noisy.
properly.
If an error occurs, one of the following errors is displayed.
Take the measures described below to solve the problem.
Display
Cause
Measure
Disc is inserted incorrectly.
Eject the disc then reload it properly.
ERROR 3
The disc format is not supported.
Try another disc.
ERROR 5
This is a failure of deck's mechanism.
Consult your store of purchase.
If an error display other than the ones described above appears, press the Reset button. If the
problem persists, turn off the power and consult your store of purchase.
* When the Reset button is pressed, frequencies of radio stations, titles, etc. stored in memory
are cleared.
CZ200
19

Advertisement

Table of Contents
loading

Table of Contents