Control Panel - AEG SKD71800F0 User Manual

ble regulations to obtain from
your local authorities. Avoid
damaging the cooling unit, espe-
cially at the rear near the heat ex-

2. CONTROL PANEL

Display
1
Temperature warmer button
2
Temperature colder button
3
OK button
4
Mode button
5
ON/OFF button
6
It is possible to change predefined
sound of buttons to a loudly one by
pressing together Mode button and
Temperature colder button for some
seconds. Change is reversible.
2.1 Display
1
Timer function
1
DYNAMICAIR function
2
Minute Minder function
3
Child Lock function
4
Alarm indicator
5
Temperature indicator
6
Holiday function
7
COOLMATIC function
8
2.2 Switching on
To switch on the appliance do these
steps:
6
8 7
2 3 4 5 6
changer. The materials used on
this appliance marked by the
symbol
1
5 4 3
1. Connect the mains plug to the pow-
er socket.
2. Press the ON/OFF button if the dis-
play is off.
3. The alarm buzzer could operate af-
ter few seconds.
To reset the alarm refer to "High
temperature alarm".
4. If "dEMo" appears on the display,
the appliance is in demonstration
mode. Refer to "What to do if..."
paragraph.
5. The temperature indicators show the
set default temperature.
To select a different set temperature re-
fer to "Temperature regulation".
2.3 Switching off
To switch off the appliance do these
steps:
1. Press the ON/OFF button for 5 sec-
onds.
2. The display switches off.
To disconnect the appliance from
3.
the power disconnect the mains
plug from the power socket.
2.4 Temperature regulation
The set temperature of the fridge may
be adjusted by pressing the temperature
button.
Set default temperature: +5°C for the
fridge.
The temperature indicator shows the set
temperature.
ENGLISH
are recyclable.
2
5