Mitsubishi Electric XD8500U User Manual page 19

Viewing computer images (continued)
B. Plugging the power cord
breaker to supply the power to the projector. If you do not have such outlet, ask your dealer to install it.
1
Power cord (example)
country.
plug. If the power plug doesn't fit your wall outlet, ask an electrician to change the wall outlet.
using other voltages or frequencies than rated. If you use a power supply using other voltage than rated, prepare
an appropriate power cord separately.
Use 100-240 V AC 50/60 Hz to prevent fire or electric shock.
Do not place any objects on the power cord or do not place the projector near heat sources to prevent damage to
the power cord. If the power cord should be damaged, contact your dealer for replacement because it may cause
fire or electric shock.
Do not modify or alter the power cord. If the power cord is modified or altered, it may cause fire or electric shock.
Caution:
Plug in the power cord firmly. When unplugging, hold and pull the power plug, not the power cord.
Do not plug in or out the power cord with your hand wet. It may cause electric shock.
connected cords. Otherwise, the power cord may be damaged, resulting in fire or electric shock.
a dry cloth. If you continue to use the projector without cleaning, it may result in fire or electric shock. Clean the
power plug periodically at least once a year.
Otherwise, it may cause fire.
1. Plug the attached power cord into the power cord inlet of
2. Plug the other end of the power cord into a power outlet.
Earthing
terminal
2
EN-19
this projector. Fix the power cord to the projector with the
power cord holder.