Lamp Relay - Mitsubishi Electric XD8500U User Manual

Lamp relay

Using the lamp relay function, you can project images
continuously. The lamp relay function automatically
rests or switches the lamps. The lamp relay is
performed when LAMP SELECT in the INSTALLATION
1 menu is set to DUAL or SINGLE.
Setting the lamp relay interval
When LAMP SELECT is set to DUAL:
Either of the lamps is automatically put to rest.
(See page 31 for menu setting.)
1. Display the INSTALLATION 1 menu.
2. Select LAMP SELECT by pressing the  or  button.
2 LAMP SELECT
1
3. Press the ENTER button.
by pressing the  or  button.
4. Select DUAL
LAMP SELECT
2
LAMP SELECT
1
5. Press the ENTER button.
6. Select LAMP RELAY by pressing the  or  button.
LAMP RELAY
7. Select 1H/24H or 2H/1W
 button.
1H/24H .....Select this setting when the lamp
is operated at a specified time of
the day. During the continuous
projection, LAMP 1 or LAMP 2 is
automatically turned off for 1 hour
in 24 hours. After the interval is set,
the lamps are turned off for 1 hour
alternately at the specified interval.
At the time of power-on or menu setting
2
1
Off
Illuminating
LAMP 1
LAMP 2
2H/1W ......During the continuous projection,
LAMP 1 or LAMP 2 is automatically
turned off for 2 hours in a week.
After the interval is set, the lamps are
turned off for 2 hours alternately at
the specified interval.
At the time of power-on or menu setting
1 2
Off
LAMP 1
LAMP 2
8. Press the ENTER button.
box to set the lamp relay interval is displayed.
cleared and the projector resumes operation
from the time of the power-on or menu setting
shown in the preceding step.
DUAL
DUAL
1H/24H
by pressing the  or
3 4 5 6 7
3 4 5 6 7
Illuminating
or 2H/1W , the
1H/24H
2H/1W
9. Move the key cursor using the direction buttons to
select the number you want to enter and then press
the ENTER button.
1H/24H
2H/1W
← key:
→ key:
DEL key:
CLEAR key: Deleting all the entered characters.
buttons (0 to 9) while holding down the NUM
button on the remote control.
conditions, an error dialog box is displayed at
the screen center.
∙ The value has been cleared by DEL or CLEAR
8 (days)
and left blank.
∙ The value you entered is out of the setting
range.
1H/24H
2H/1W
∙ The value of each item is out of the setting
range.
D .................. 7 or over (2H/1W
H .................. 24 or over
10. When selecting OK, the setting is completed as
the lamp-switching interval stored. However, when
selecting CANCEL, the setting is completed without
8 (days)
storing.
selecting OK or CANCEL.
RELAY in the INFORMATION menu.
Important:
relay may not be performed on time due to errors of
the clock function.
EN-55
NEXT LAMP RELAY
2 3 H
0 1 2 3 4 5 6 7 8 9
OK CANCEL
NEXT LAMP RELAY
6 D 2 2 H
0 1 2 3 4 5 6 7 8 9
OK CANCEL
..... 23H (23 hours)
...... 6D 22H (6 days and 22 hours)
S hifting the position of enter cursor
to the left for each character.
Shifting the position of enter cursor
to the right for each character.
Deleting the character in the
position of enter cursor for each
character.
.... 24H or over
..... 6D 23H or over
DEL
CLEAR
DEL
CLEAR
only)