Viewing Computer Images - Mitsubishi Electric XD8500U User Manual

Viewing computer images

A. Connecting the projector to a computer
Preparation:
monitor.
COMPUTER/
COMPONENT
VIDEO IN-1
R/P G/Y B/P
R B
1
COMPUTER/
COMPONENT
VIDEO IN-2
COMPUTER/
COMPONENT
1
VIDEO DVI-D IN
(HDCP)
on the type of the computer to be connected.
About DDC
The COMPUTER/COMPONENT VIDEO IN-1 terminal of this projector complies with the DDC1/2B standard and the
COMPUTER/COMPONENT VIDEO DVI-D IN (HDCP) terminal complies with the DDC2B standard. When a computer
supporting this standard is connected to this terminal, the computer will automatically load the information from this
projector and prepare for output of appropriate images.
After connecting a computer supporting this standard to this terminal, plug the power cord of the projector in the
wall outlet first, and then boot up the computer.
Computer
1
2
To monitor port
Computer cable
Computer
H/HV V
To monitor
port (5 BNC)
V H/HV B/P G/Y R/P
B
BNC cable (option)
Computer
2 To DVI
DVI cable (option)
For analog connection:
(For using the COMPUTER/COMPONENT VIDEO IN-1
terminal.)
1. Connect one end of the supplied computer cable to the
COMPUTER/COMPONENT/VIDEO IN-1 terminal of the
projector.
2. Connect the other end of the computer cable to the
monitor port of the computer.
computer, press the COMPUTER 1 button on the remote
control.
For analog connection:
(For using the COMPUTER/COMPONENT VIDEO IN-2
terminal.)
1. Connect one end of a commercially available BNC cable to
the COMPUTER/COMPONENT VIDEO IN-2 terminal of the
projector.
2. Connect the other end of the BNC cable to the 5 BNC
terminals of the monitor port of the computer.
2
R
computer, press the COMPUTER 2 button on the remote
control.
For digital connection:
1. Connect one end of a commercially available DVI cable to
the COMPUTER/COMPONENT VIDEO DVI-D IN (HDCP)
terminal of the projector.
2. Connect the other end of the DVI cable to the DVI terminal
of the computer.
computer, press the DVI-D (HDCP) button on the remote
control.
Turn on the power of the projector before starting the
computer.
EN-18