Network Easy Setting - Panasonic SC-BT230 Operating Instructions Manual

Network Easy Setting

Follow the on-screen instructions and make
the settings with [3, 4, 2, 1] and press [OK].
Network Easy Setting (Connection Check)
LAN setup and testing of home network and Internet
connections are required for Internet functions
(BD-Live etc.).
Broadband Internet connection is necessary for
BD-Live.
Is a LAN cable already connected ?
Please refer to the operating instructions about network
connection.
Press [OK] to proceed.
When you experience
problems with settings
Network Easy Setting (Connection Test)
Network Easy Setting (Connection Test)
Complete.
1. LAN cable connection
2. IP address setting
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select "Yes" and press [OK] to check network
connection again.
Select "No" and press [OK] to finish Network
Easy Setting.
OK
Display
1. LAN cable connection
2. IP address setting
3. Connection to gateway
1. LAN cable connection
2. IP address setting
3. Connection to gateway
1. LAN cable connection
2. IP address setting
3. Connection to gateway
VQT2Q56
20
OK
RETURN
: Fail
: Fail
: Fail
Yes No
:Fail ≥ Connection of
the LAN
:Fail
cables
:Fail
(
:Pass ≥ Connection
and settings
:Fail
of the hub
:Fail and router
≥ Settings of
:Pass
"IP Address /
:Pass DNS
Settings"
:Fail
(
Network Easy Setting (Internet Connection Test)
Display
Cannot find the server.
(B019)
Failed to connect to
the server.
(B020)
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting "Network Easy Setting" in
the Setup menu. (
≥ You can redo these settings individually using "Network Settings". (
Check the
following
18)
39)
Network Easy Setting (Internet Connection Test)
Complete.
- Connection to the Internet : Fail(B019)
Failed the connection test.
Cannot find the server.(B019)
Please refer to the operating instructions for the cause
of the error and the solution for it.
Press [OK].
OK
Check the following
≥ "Primary DNS" and "Secondary
DNS" settings of "IP Address /
DNS Settings"(
≥ The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
≥ Settings of "Proxy Server
Settings" ( 39) and the router
39)
39)
39)