Corner Installation - MHSC 36STFL Installation And Operating Instructions Manual

Lo-Rider Vent Free Fireboxes
SEE-THROUGH UNIT (36STFL)
INSTALLATION
1. Attach nailing flanges in desired position. Figure 16
. Slide firebox into prepared framing or position firebox
in its final position and frame later.
3. Level and plumb firebox by checking edges of firebox.
Shim if necessary.
4. Attach nailing flanges to studs. Figure 17
5. Install canopy. Refer to Page 13 for canopy installa-
tion.
RIGHT (LRCF36) AND LEFT (LLCF36)

CORNER INSTALLATION

1. Attach nailing flanges in desired position. Figure 16
. Slide firebox into prepared framing or position firebox
in its final position and frame later.
3. Level and plumb firebox by checking edges of firebox.
Shim if necessary.
4. Attach nailing flanges to studs. Figure 18
5. Install canopy. Refer to Page 13 for canopy installa-
tion.
1
Figure 17 -
Location of Nailing Flanges
FP2896
see thru framing
Nailing
Flanges
Figure 18 -
Location of Nailing Flanges and Floor Screws
FP2897
corner nail flanges
FIREPLACE INSTALLATION
Nailing
Flanges
FP896
FP898
79D0007