Splitting The Keyboard - Kawai Concert Performer CP136 Owner's Manual

You cannot raise or lower the split point for the
SOLO part by using the L4, R4 buttons.
L4 Lowers the split point.
Basic Controls

Splitting the keyboard.

When the LEFT/SPLIT Part is activated, the CP automatically splits the keyboard and only the
sound assigned to the LEFT/SPLIT Part will be heard when you play below a specified key (split
point) on the keyboard. The default split point is between F2 and F#2 but you can freely change
the split point to any key on the keyboard.
To change the split point:
1) Press the LEFT/SPLIT button to activate the LEFT/SPLIT Part. The LEFT/SPLIT button
LED will light and the LCD screen will display a diagram of the CP136's 88 note keyboard.
2) Press the LEFT/SPLIT button again, and while holding it down, press the desired key
on the keyboard that you want to serve as the split point. The key you press will become
the lowest note the Right hand Parts will play (RIGHT1, RIGHT2, and SOLO). The LEFT/
SPLIT sound will be heard when keys below the split point are played.
3) The split point for the LEFT/SPLIT part can also be set from the PERFORMANCE button
menu. You may also use the L4 and R4 buttons to move the split point. On the LCD
screen the split point marker will move across the 88 note keyboard diagram as you
press these buttons.
L 1
L 2
L 3
L 4
L 5
F 1 F 2 F 3 F 4
• Moving the split point completely to the LEFT end of the keyboard will allow the LEFT/SPLIT
Part to function as a layer with the three right hand Parts. In this manner you can create a four-
part layer across the entire keyboard.
R 1
R 2
R 3
R4
R 4
R 5
F 5 F 6 F 7
Raises the split point.
11