Kawai Concert Performer CP136 Owner's Manual page 38

30
To set the Left Mode and Split point:
1) Press and hold the PERFORMANCE button. The Performance screen will be displayed.
2) Press the LEFT MODE button (L4) and use the dial to select the mode.
3) If the Left Mode is set to Split, then press the LEFT SPLIT POINT button (L5) and use
the dial to set the split point.
4) Press the PERFORMANCE button to exit.
SOLO SETTINGS
This configures the special settings for the Solo part. Changing these settings will also change
these settings in the Performance menu.
Solo Priority
Since the Solo part allows you to play only one note at a time (monophonic), it is important to
select which note will be played by the Solo part when more than one key is played at a time.
There are three options:
Top Note The Solo part plays only the highest note among the notes played at one time.
Bottom Note The Solo part plays only the lowest note among the notes played at one time.
Last Note The Solo part plays only the last key played among the notes played at one time.
Trigger Mode
The trigger mode determines whether or not the note played by the Solo part will be re-triggered
when certain notes are released. There are two options:
Retrigger When the note played by the Solo part is released, depending on the Solo priority
setting, the next available priority note will be played automatically by the Solo
part.
For example: when the Solo Priority is set to Top Note, and you release the highest note, the next
note below the note you released becomes the highest note and will now be played by the Solo
part.
Kawai Concert Performer Series Digital Piano