Kawai Concert Performer CP136 Owner's Manual page 37

Basic Controls
Panel Lock
Locks all buttons on the panel to prevent them from being tampered with or pressed accidentally
while you are playing. When the Performance Button is turned On the panel buttons will be locked.
Turn the Performance button Off to unlock the panel buttons.
To assign Solo Portamento or Panel Lock:
1) Press and hold the PERFORMANCE button. The Performance screen will be displayed.
2) Press the PERFORMANCE BUTTON ASSIGN button (L3) and use the dial to assign a
function.
3) Press the PERFORMANCE button to exit.
4) Press the PERFORMANCE button. The LED will light and the function assigned to the
button will be activated. The word "BUTTON" will be displayed in the upper left on the
main screen to indicate that the Performance button is active.
5) Press the PERFORMANCE button. The LED will turn off and the function will be
deactivated. The word "BUTTON" will disappear from the main screen.
6) When Solo Portamento is selected, you can adjust the Portamento time on the edit
menu. Press the EDIT button (F1) to go to the Edit menu.
• If the LEFT and CENTER PEDAL OVERRIDE and PERFORMANCE BUTTON ASSIGN are all
set to None, the LED will not light when you press the PERFORMANCE button.
LEFT MODE
When using the Left part, you can select between two Modes, Split or Layer.
Split
When the LEFT/SPLIT Part is activated, the CP automatically splits the keyboard and only the
sound assigned to the LEFT/SPLIT Part will be heard when you play below a specified key (split
point) on the keyboard. The default split point is between F2 and F#2 but you can freely change the
split point to any key on the keyboard.
Layer
When the LEFT/SPLIT Part is activated, the LEFT/SPLIT Part will function as a layer with the three
right hand Parts. In this manner you can create a four part layer across the entire keyboard.
29