Recording; Record With Your Video Recorder Without Easylink; Record With Your Video Recorder With Easylink - Philips TV User Manual

Tv
Hide thumbs Also See for TV:
Table of Contents

Advertisement

7
8
9
0
i
0
INSTANT
ZOOM
®
U
f
h
INSTANT
X
®
q
P

Record with your video recorder without EasyLink

To record S-VHS quality, connect a S-VHS peripheral directly to the video
recorder.
Record a TV programme
&
Select the programme number on your video recorder.
é
Set your video recorder to record.
See the handbook for your video recorder.
Switching programme numbers on your TV does not disturb recording !
Record a programme on your video recorder connected to
from Audio/Video equipment connected to
EXTERNAL 2
,
EXTERNAL 1
EXTERNAL 3
&
Switch on the equipment.
é
Select the right external on your video recorder.
"
Set your video recorder to record.
You record what you are watching on the screen.
Do not switch programme numbers or do not switch off your TV when you are

recording !

Record with your video recorder with EasyLink

If you have connected a S-VHS video recorder provided with the EasyLink function,
you can record S-VHS-quality from a S-VHS peripheral connected to the right side of
the TV. (E.g. from a S-VHS camcorder.)
In TV mode, it is possible to start a direct recording of the programme which is being
displayed on the TV screen.
record key ® under the door of the remote control of the TV.
Press the
INSTANT
The video recorder switches on from standby and a message of what is being
recorded appears on the screen.
The video recorder starts recording the programme you are watching.
Switching programme numbers on your TV does not disturb recording !
When recording a programme from a peripheral connected to
, you can not select another TV programme on the screen.
FRONT
To watch TV programmes again, press the programme number you want to select
twice. Then the recording is stopped and your video recorder switches to standby.
If you switch to standby during recording of a programme from a peripheral
connected to
EXTERNAL
indicates that you are still recording. The blinking stops after the recording is finished.
Record with your video recorder with
If your video recorder is equipped with
programmes to be recorded automatically in the
that the TV is in the standby mode or switched on for the recording to start.
or to sockets on the right side of the TV
1, 3 or
, the blinking lamp on the front of your TV
FRONT
TV
Link, and you tagged one or more
NEX
IEW
NEX
1, 3 or
EXTERNAL
TV
Link
NEX
IEW
TV
mode, it is not necessary
IEW
Record
31

Advertisement

Table of Contents
loading

Table of Contents