For Your Safety Read Before Lighting - Vermont Castings MJ27NR Installation And Operating Instructions Manual

OPERATING INSTRUCTIONS

FOR YOUR SAFETY READ BEFORE LIGHTING

A. This appliance is equipped with a piezo ignition device which lights the pilot. If piezo is not working
properly see Match lighting Instructions, Page 23.
B. BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the floor
because some gas is heavier than air and will settle on the floor.
WHAT TO DO IF YOU SMELL GAS:
•
Do not attempt to light any appliance.
•
Do not touch any electric switch; do not use any phone in your building.
•
Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instruc-
tions.
•
If you cannot reach your gas supplier, call the fire department.
C. Use only your hand to push in, or turn the gas control knob. Never use tools. If the knob will not push
in or turn by hand, don't try to repair it. Call a qualified service technician. Force or attempted repair
may result in a fire or explosion.
D. Do not use this appliance if any part of it has been under water. Immediately call a qualified service
technician to inspect the appliance and to replace any part of the control system and any gas control
that has been under water.
Location of Piezo Ignitor, Control Knobs and Switch
86D0024
If you do not follow these instruction exactly,
a fire or explosion may result causing
property damage, personal injury or loss
of life.
FP2016
burner controls
"MOJO" Series Unvented Gas Log Sets
Pilot
Remote Receiver
On/Off/Pilot Knob
FP2016
21