Part Names And Functions; Front Panel; Display - Denon AVR-1609 Owner's Manual

ENGLISH
I
GDYNAMIC VOLUME button
(34)
*
About Dynamic Volume
Audyssey Dynamic Volume
™
solves the problem
of large variations in volume level between
television programs, commercials. and between
the soft and loud passages of movies.
Audyssey Dynamic EOTM is integrated into
Dynamic Volume so that as the playback volume
is adjusted automatically. the perceived bass
response. tonal balance, surround impression.
and dialog clarity remain the same.
*
About Dynamic EO
Audyssey Dynamic EO solves the problem of
deteriorating sound quality as volume is decreased
by taking into account human perception and
room acoustics. Audyssey Dynamic EO works in
tandem with Audyssey MultEO@ to provide well-
balanced sound for every listener at any volume
level.
G
VIDEO SELECT button····· (38)
f) ZONE2 indicator
This indicator lights when the ZONE2 is turned
on.
(Off when the "SOURCE" is selected.)
o
Tuner reception mode indicators
These light according to the reception conditions
when the input source is set to "TUNER".
-AUTO
This lights when in the auto tuning mode.
-STEREO
In the FM mode. this lights when receiving
analog stereo broadcasts.
-TUNED
This lights when the broadcast is properly tuned
in.
~INPUT mode indicators···
(37)
~
SIGNAL indicators
~Display
~
SPEAKERS indicators (38)
e
Remote control sensor······················ .. ··
(3)
fj
ZONE2/REC SELECT button··············
(43)
@9S0URCESELECT knob . (37)
f/SOURCE button··· (37)
~STATUS
button . (36)
i>
DIMMER button . (38)
€!>
RESTORER button·
(35)
G
BAND button .. . (38)
GSHIFT button··············································· (39)
G
PRESET CHANNEL buttons (!,) . .. (39)
.TUNING buttons
(!
'I··
(38)
~ MULTEO button
(33)
o
Signal channel indicator
Lights when the preset channel is displayed at
e.
o
Information display
_Input signal indicators
• Master volume indicator
This displays the volume level.
The Setup item number is displayed in System
Setup.
o
ZONE2/REC OUT source indicators
The indicator for the source selected for ZONE2/
REC OUT lights.
o
REC SELECT indicator
Lights while selecting the REC SELECT mode.
(Off when the "SOURCE" is selected.)
seLECT I ENTER
- The control functions in the same way as the
cursor
<J
button when turned counterclockwise.
as the cursor
~
button when turned clockwise.
- The control functions in the same way as the
ENTER
button when pressed the knob.
"Cursor buttons (Ll.
'VI
(21)
~ MASTER VOLUME control knob··
(38)
~ Dynamic Volume indicator·
(34)
__ MultEO indicator
(33)
~
Master volume indicator
~
SURROUND BACK indicator
. . SELECT/ENTER knob
11
- The
SELECT/ENTER
knob on the main unit
operates in the same way as the cursor
<J
and ~
buttons on the remote control unit.
·········(37)
····················(37)
······(37, 44)
······(38)
·············(37)
········(38.44)
···········(50)
···(44)
For buttons not explained here. see the page indicated in parentheses ( ).
Part Names and Functions
o
Power operation button
(ON/STANDBY) .
o
Power indicator
_ Power switch (_ON .OFF)
• Headphone jack (PHONES)···
o
INPUT MODE button .
o
SPEAKERS button··· .
f)ZONE2 ON/OFF button····
00UICK SELECT buttons
OV. AUX INPUTconneetors
Remove the cap covering the connectors when
you want to use them.
==
0000
0
0
0000 000 ~ U
_______O#_---.._
__..J
c : =
C!)SETUP MIC jack .
(18)
. . SYSTEM SETUP button
(21)
':&SURR. MODE / SURR. PARA button (29,31)
4