Part Names And Functions - Denon DRR-201SA Operating Instructions Manual

ENGLISH
5 5

PART NAMES AND FUNCTIONS

(1) Front Panel
q
Power operation switch
(ON/STANDBY)
• When pressed once, the power turns on. When
pressed again, the power is set to the standby
mode.
• The color of the indicator changes according to
the mode, as follows:
• When the power is on: Green
• In the standby mode: Red
w
Cassette holder open/close button (
• Press this button to open and close the cassette
holder.
• When pressed in the standby mode, the power
turns on and the cassette holder opens.
e
Display
• Refer to page 3.
r
Dolby NR selector button (DOLBY NR)
• The Dolby NR mode switches as follows each
time this button is pressed:
OFF Type B Type C
• When playing a tape, set the Dolby NR mode to
the same mode set when the tape was recorded.
t
Jog dial/direction selector button
( /REC LEVEL/
86 79
• Press this to change the direction of playback or
recording on the cassette tape.
• Use this to fast-forward and rewind the tape.
(Refer to page 9.)
• Use this for the music search operation (to move
to the beginning of a selection). (Refer to page 9.)
• Use this to adjust the recording level (volume).
(Refer to page 8.)
y
CD synchronized recording button
(CD SRS)
• Use this button to record CDs easily when the
DRR-201SA is connected in a system with the
201SA series. (Refer to page 11.)
u
Recording/recording mute button
( REC/REC MUTE)
4
• Press this button for recording.
• When pressed once, the recording pause mode is
set.
• When pressed in the recording pause mode, a
blank space of approximately 5 seconds is
created, after which the recording pause mode is
set.
6
i
Stop button ( )
2
• Press this button to stop playback or recording.
o
Reverse mode selector/counter reset
button (REVERSE/RESET)
• The reverse mode selection mode is set when
this button is pressed and held in for 2 seconds or
more.
• Press this button to reset the tape counter
)
5
display.
!0
Play button ( )
1
• Press this to play the cassette tape.
• When pressed in the standby mode, the power
turns on automatically and playback begins.
!1 1
Cassette holder
• Press the cassette holder open/close button (
open and close the cassette holder.
)
0 1
(2) Rear Panel
!2
Line output jacks (LINE OUT)
• Connect these to the amplifier's TAPE input jacks.
• When connecting the DRR-201SA in a system
with the 201SA series, be sure to connect these
jacks to the PB TAPE jacks on the pre-main
amplifier (PMA-201SA).
!3
Line input jacks (LINE IN)
• Connect these to the amplifier's REC OUT TAPE
output jacks.
• When connecting the DRR-201SA in a system
with the 201SA series, be sure to connect these
jacks to the REC OUT TAPE output jacks on the
pre-main amplifier (PMA-201SA).
• When these jacks are connected, the sound of
other components connected to the amplifier can
recorded on the DRR-201SA.
!4
System connectors
(SYSTEM CONNECTOR 1 and 2)
• When connecting the DRR-201SA in a system
) to with the 201SA series, connect these to the
5
system connectors on other components using
the included system cords.
!5
Power cord
• Plug this cord into a wall power outlet.
(3) Display
!6
Counter display
• The tape counter is displayed here.
• During playback or recording in the forward
direction: The counter increases.
• During playback or recording in the reverse
direction: The counter decreases.
• When the counter drops below zero: The "–"
sign is displayed.
!7
Level meter
• This indicates the playing level in the play mode,
the recording level in the recording mode.
!8
Mode indicators
• These indicate the various modes.
• TAPE:
This lights when a cassette tape is loaded in the
cassette holder, and is off when no cassette
tape is loaded.
• B and C:
These light to indicate the Dolby NR mode (B or C).
• :
4
This lights in the recording and recording pause
modes, and flashes in the recording mute
mode.
• PLAY:
This lights in the play and recording modes, and
flashes in the music search mode.
F G
• and :
These indicate the direction of playback (
forward playback, F for reverse playback).
These light in the play, recording and pause
modes.
• :
This indicates the reverse mode.
• : One-side mode
• : Two-side mode
• : Continuous mode
• CD SRS:
This lights during CD synchronized recording.
G
for