Buttons Used For Navigating Through The Menus - Integra DTR-6.4/5.4 Instructional Manual

Setup Menu

Buttons used for navigating through the menus

You can change settings in the Setup Menu using the buttons on the
front panel and on the remote controller.
The buttons on the remote controller correspond to those on the
DTR-6.4/5.4 as shown below.
Buttons on DTR-6.4/5.4
Displaying the Main Menu and exiting the menu
SETUP
Selecting a menu or menu item
UP
DOWN
Setting the value
LEFT
RIGHT
Selecting the menu
ENTER
Returning to the previous screen
RETURN
/ / / Setup Return
Enter
Buttons on remote controller
SETUP
(upper edge of
ENTER button)
(lower edge of
ENTER button)
(left edge of
ENTER button)
(right edge of
ENTER button)
ENTER
RETURN
RC-534M
Return
C H
Disc
Audio Sel
A Angle
TV / VCR
Random
Rec
Input Selector
DVD
V 1 V 2
V 3 V 4
1
Pure A
4
SURR
7
DSP
+10
Display
-- / ---
If you want to perform these operations using the remote controller,
first press the RCVR button.
1. Press the Setup button.
The main menu appears on your TV monitor.
2. Using the and cursor buttons, select the menu
that you want to enter.
3. Press the Enter button to enter the selected menu.
The screen for that menu appears.
4. Using the and cursor buttons, select the sub-
menu that you want to enter, and press the Enter
button.
Each sub-menu has different settings that can be changed as
desired, and they are all explained in the pages that follow. To
change a setting, first select it using the
and then change the setting using the
5. Press the Return button to set the new settings and
return to the previous menu screen, and again to
return to the main screen.
Note:
Press the Setup button to exit the Setup menu immediately.
Setup
VOL
/ / /
Muting
M
Subtitle
Level
ENTER
Audio Adjust
C D
TAP TUN
V 5 P H
2 3
Direct Stereo
5 6
THX All ST
8 9
DSP Re-EQ
0
Search
Dimmer Zone 2
Enter
and cursor buttons,
and cursor buttons.
31