Using The Appliance - Philips HP6445/00 User Manual

I
Cord
J
Adapter plug
K
Brush

Using the appliance

Make sure your skin is clean, entirely dry and
free from grease. Do not use any cream
before you start epilating.
1 Put the adapter plug (J) in the wall socket.
2 Insert the appliance plug (H) into the inlet
socket (G). (Fig. 2)
3 Remove the protective cover (A). (Fig. 3)
4 Switch the appliance on by sliding the
on/off switch (F) to the desired speed
setting:
Select speed I (Fig. 4) for areas with little hair
growth and for areas where bones are located
directly beneath the skin, such as knees and
ankles. Select speed II (Fig. 5) for larger areas with
stronger hair growth.
5 Stretch the skin with your free hand to
make the hairs stand upright. (Fig. 6)
6 Place the epilating head (D)
perpendicularly onto the skin so that the
ENGLISH
9