Philips HQ9190 Instructions Manual page 16

ENGLISH
18
C
C
C
C
Replace damaged or worn shaving heads with
HQ9 Philips shaving heads only.
1 Switch the shaver off, remove the
powerplug from the wall socket and pull
the appliance plug out of the shaver.
2 Press the release button to open the
shaving unit.
3 Turn the lock anticlockwise (1) and
remove the retaining frame (2).
4 Remove the shaving heads and place new
ones in the shaving unit.
Make sure that the projections of the shaving
heads fit exactly into the recesses.
5 Put the retaining frame back into the
shaving unit (1) and turn the lock
clockwise (2).
6 Close the shaving unit.
The shaving unit symbol will go out if you
keep the on/off button pressed for 3 seconds.
Accessories
The following accessories are available:
- HQ8500/HQ8000 powerplug.