Wizard-Detected Fixed Ip (Static) Account Setup - NETGEAR DG834G Reference Manual

DNS servers are required to perform the function of translating an Internet name such as
www.netgear.com
obtain DNS server addresses from your ISP and enter them manually here.
3. Click Apply to save the settings.
4. Click the Test button to test your Internet connection. If the NETGEAR Web site does not
appear within one minute, refer to

Wizard-Detected Fixed IP (Static) Account Setup

If the router determines that your Internet service account uses Fixed IP assignment, you will be
directed to the page where you can enter the IP addresses.
1. If required, enter the Account Name and Domain Name from your ISP.
2. Choose "Use Static IP Address" or "Use IP Over ATM" (IPoA — RFC1483 Routed)
according to the information from your ISP. If you choose IPoA, the router will be able to
detect the gateway IP address but you still need to provide the router IP address.
3. Enter your assigned IP Address, Subnet Mask, and the IP Address of your ISP's gateway
modem router. This information should have been provided to you by your ISP. You need the
configuration parameters from your ISP.
4. Enter the IP address of your ISP's Primary DNS Server. If a Secondary DNS Server address is
available, enter it also.
DNS servers are required to perform the function of translating an Internet name such as
www.netgear.com
obtain DNS server addresses from your ISP and enter them manually here.
5. Click Apply to save the settings.
6. Click the Test button to test your Internet connection. If the NETGEAR Web site does not
appear within one minute, refer to
Configuring Your Internet Connection
Reference Manual for the ADSL Modem Wireless Router DG834G
to a numeric IP address. For a fixed IP address configuration, you must
Chapter 9,
to a numeric IP address. For a fixed IP address configuration, you must
Chapter 9,
v1.3, March 2007
"Troubleshooting".
"Troubleshooting".
3-13