Step-By-Step Configuration - NETGEAR DG834G Reference Manual

Reference Manual for the ADSL Modem Wireless Router DG834G
10.5.6.0/24
Gateway A
LAN IP
10.5.6.1
DG834G
Figure B-1
Note: Product updates are available on the NETGEAR, Inc. web site at
http://kbserver.netgear.com/DG834G

Step-By-Step Configuration

1. Configure the DG834G v3 as in the Gateway-to-Gateway procedures using the VPN Wizard
(see "How to Set Up a Gateway-to-Gateway VPN Configuration" on page
to use appropriate network addresses for the environment.
The LAN Addresses used in this example are as follows:
Unit
DG834G
FVL328
a. In Step 1, enter toFVL328 for the Connection Name.
b. In Step 2, enter 22.23.24.25 for the remote WAN's IP address.
c. In Step 3, enter the following:
• IP Address = 172.23.9.1
• Subnet Mask = 255.255.255.0
B-2
VPNC Example
Network Interface Addressing
14.15.16.17 22.23.24.25
WAN IP WAN IP
WAN IP
14.15.16.17
22.13.24.25
v1.3, March 2007
Gateway B
FVL328
v3.asp.
LAN IP
10.5.6.1
172.23.9.1
NETGEAR VPN Configuration
172.23.9.0/24
LAN IP
172.23.9.1
8-21), being certain
LAN Subnet Mask
255.255.255.0
255.255.255.0