Insignia NS-NAV01 GPS Quick Setup Manual

Congratulations on your purchase of a high-quality Congratulations on your purchase of a high-quality
Insignia product. Your GPS is designed for reliable and Insignia product. Your GPS is designed for reliable and
trouble-free performance. Use this guide for initial setup. trouble-free performance. Use this guide for initial setup.
See your User Guide for more information. See your User Guide for more information.
Package contents Package contents
• 4.3" GPS • 4.3" GPS
• DC power adapter • DC power adapter
• Mounting bracket • Mounting bracket
• Mounting cradle • Mounting cradle
• SD memory card • SD memory card
• User Guide • User Guide
• Quick Setup Guide • Quick Setup Guide
Setting up your GPS

Charging the battery

Your portable GPS comes with a built-in rechargeable
battery. Fully charge the battery before using the GPS for the
first time. Charging time is normally about three hours. A
fully charged battery delivers about two hours of use.
See "Connecting power to your GPS" below.
Connecting power to your GPS
Connecting DC power
CAUTION: Disconnect the GPS from the DC power adapter when starting the vehicle.
• Connect the DC power adapter plug to the GPS's USB port, then plug the other end to the vehicle's
12-24V DC accessory socket (cigarette lighter socket).
Features
Top and side panels
Bottom panel
Reset USB charging
hole
Mounting Mounting
slot slot
Power button
Card slot
Mounting your GPS in a car
WARNING: The assembly must not be mounted so that it impairs the driver's view of the
road.
Make sure that your car's airbags are not obstructed by the GPS.
Use the supplied mounting bracket and cradle to mount your GPS in a vehicle.
1 Slide the mount cradle onto the end of the mounting bracket to attach it.
2 Set the bottom edge of your GPS onto the mount cradle, then push the GPS
into the tab (1) at the top of the mount cradle.
To remove the GPS, lift the tab (1) at the top of the mount cradle and pull
the GPS forward.
3 Lift the suction cup lever (2) and then press the suction cup to the
port
windshield.
4 Press the suction cup lever toward the windshield to attach the bracket to
the windshield.
5 Rotate the knob to adjust the assembly to the proper position.
Quick Setup Guide
NS-NAV01 GPS
Actual product may vary from image shown.
cigarette lighter
socket