Insignia NS-CNV20 Faqs

How do I pair my phone with my GPS unit?

•
Touch the Phone button on the home screen. A message displays "Your phone is not set up. Set up now?" Touch Yes.
Bluetooth settings screen opens.
•
Touch the green arrow on the right. The Bluetooth enable/disable screen opens.
•
Touch enable, then touch the back arrow at the bottom of the screen.
•
Touch PIN Number to display the keypad, then type your phone's PIN number. Please refer to the manual that came
with your cellular phone. The default PIN number for many Bluetooth devices is 0000.
•
Touch Save after you enter the number. The screen returns to the Bluetooth management screen. If you have not set
your phone to pair with a Bluetooth device, the screen indicates "No phone connected."
•
Set your phone to scan for a Bluetooth device. It should indicate that it has found a Bluetooth device and the GPS
device indicates that a phone is paired.
•
Touch OK to close this message and return to the Bluetooth management screen. The screen displays the name of the
phone you paired.
•
Touch any button at the bottom to exit the screen and continue using the device.
How do I answer a call with my GPS when my phone is connected via Bluetooth?
•
When a call is received, an incoming call message displays showing the phone number.
•
Touch the Phone alert which displays the incoming call information, then touch answer or ignore.
How do I place a call using my GPS when my phone is connected via Bluetooth?
•
Touch the Phone button on the home screen. The dial keypad opens.
•
Enter the phone number, then touch Call. Your phone dials the number.

Where can I get my maps updated? Does it cost anything?

•
Updates are available in Best Buy stores at the Geek Squad bench. These updates will be available up to 4 times per
year.
•
Each quarter, a notice will be sent to your GPS device letting you know when the updates are available.
•
Updates will be free for the first year. Annual subscriptions of $99 will be available after the first year is up.
•
The annual subscription includes updated maps, Google search, real time traffic, etc.

How do I attach my unit to my windshield or dash?

•
Set the bottom edge of the GPS onto the mount cradle.
•
Press down on the top edge of the cradle and pivot the top of the GPS into the cradle.
•
Push the mount cradle and GPS assembly into the mounting bracket.
•
Lift the suction fastener.
•
Place the assembly on the desired location, windshield or dash, then press the fastener down to secure it to the
surface.
•
If you are using this GPS unit in either California or Minnesota, it is against the law to place the suction mount on car
windshields, side, or rear windows as it can obstruct the driver's clear view.

How do I know how much battery charge I have left?

•
The battery charge indicator is located in the upper left corner of the screen.
If the battery is fully charged, three bars will be located inside the battery icon.
o

How long does the battery charge last?

•
A fully charged battery will last approximately 2 hours.
Insignia 3.5" Connected GPS (NS-CNV20)
FAQs
October 13, 2008