AEG COMPETENCE D2160 Operating And Installation Instructions page 10

B) TO SET THE TIMER TO SWITCH OFF
ONLY
i) Ensure the electricity supply is switched ON
and that the correct time of day is displayed,
e.g. 10.00am as Fig. 9.
ii) Place food in oven.
iii) To set the length of cooking time, press the
cooking hours button (
down, depress the increase control ( + )
until the required length of cooking time is
displayed, e.g. 2 hrs 15 mins as Fig. 10.
Depress the
necessary.
iv) Release the buttons. The AUTO display will
glow and the time of day will be displayed
after 5 seconds.
v) Set the oven temperature. The oven
indicator neon should be ON.
vi) To check the stop time during the cooking
period, simply press the stop time button
( ) and the stop time will be displayed, as
Fig. 11.
4. TO CANCEL
PROGRAMME
i) To cancel an automatic programme, press
( ) button. The AUTO display will go out
and the cookpot symbol will light, as Fig.12.
ii) Turn off oven control.
5. TO RETURN
MANUAL
At the end of a timed cooking period, the AUTO
display will flash and an alarm will sound for up
to 7 minutes.
i) To stop the sound press any of the first
three buttons, as Fig. 13.
ii) Turn off oven control. AUTO display will
continue to flash.
iii) Press ( ) button. See Fig. 14.
The AUTO display goes out and the
cookpot symbol will show.
iv) Turn the oven control on to check the oven
operates normally. The oven indicator neon
will glow.
v) Turn off the oven control.
), while holding it
decrease control (-)
AN AUTOMATIC
THE COOKER
Fig. 9
if
Fig. 10
Fig. 11
Fig. 12
TO
Fig. 13
Fig. 14
9