JVC GZ-MC200US Service Manual page 27

3.2.4 ASSEMBLY of [7]MONITOR ASSEMBLY
Disassembly procedure
STEP Fig.
PART NAME
No. No.
[1]
GRIP BASE MO1
[2]
COVER(MONI) ASSY MO2
[3]
LCD MODULE & MO3-1
LCD SUB BOARD ASSY MO3-2
MO3-3
NOTE1a:
During the procedure, be careful not to damage the parts.
NOTE1b:
When removing, be careful not to cut or break the wire.
NOTE2:
Be careful in handling the SPACER.
NOTE3a:
When attaching, be careful with the FPC wiring.
NOTE3b:
When removing, peel off the SPACER and lift the FPC to
make space.
NOTE3c:
Remove the LCD MODULE with the LCD SUB BOARD as
they are soldered together.
NOTE3d:
Refer to the Fig. MO3-4 for the wiring and the SPACER affix
position.
NOTE3e:
Refer to the Fig. MO3-3 for attaching the LCD MODULE and
LCD SUB BOARD ASSEMBLY.
Destination of connectors
CN.NO. CONNECTOR
CN3 LCD SUB CN7801
POINT NOTE
SPACER,3(S1) NOTE1a,b
SPACER, 2(S2) NOTE2
2(S3a) NOTE3a
SPACER, S3a,3(S3b) NOTE3b,c
CN3,SD3a,SD3b NOTE3d,e
LCD MODULE -
STAY(COVER)ASSY
NOTE1a
ARM(COVER)ASSY
PIN
NO.
24
SPACER
NOTE2
WIRE
SPACER
SPACER
CF SW
BOARD ASSY
(S1)
WIRE
NOTE1b
[1]
Fig.MO1
4
(S2)
[2]
5
(S2)
Fig.MO2
(No.YF059)1-27
1
(S1)
2
(S1)
3