Removal Of Vcr Deck Parts - Toshiba MW27FN1 Service Manual

2. REMOVAL OF VCR DECK PARTS

2-1: TOP BRACKET (Refer to Fig. 2-1)
Extend the 2 supports 1.
1.
Slide the 2 supports 2 and remove the Top Bracket.
2.
NOTE
1. After the installation of the Top Bracket, bend the support
1 so that the Top Bracket is fixed.
1
Top Bracket
2
Main Chassis
2-2: CASSETTE HOLDER ASS'Y (Refer to Fig. 2-2)
1. Move the Cassette Holder Ass'y to the front side.
2. Push the Locker R to remove the Cassette Side R.
3. Remove the Cassette Side L.
Main Chassis
Link Unit
Cassette Side L
2-3: CASSETTE SIDE L/R (Refer to Fig. 2-3-A)
1. Remove the Locker Spring.
Unlock the 4 supports 1 and then remove the Cassette
2.
Side L/R.
Unlock the support 2 and then remove the Locker R.
3.
Locker Spring
1
Cassette Holder
1
2
Locker R
Cassette Side R
DISASSEMBLY INSTRUCTIONS
Top Bracket
1
2
Main Chassis
Fig. 2-1
Cassette Side R
Locker R
Main Chassis
Fig. 2-2
1
1
Cassette Side L
Fig. 2-3-A
NOTE
1. In case of the Locker R installation, check if the one
position of Fig. 2-3-B are correctly locked.
2. When you install the Cassette Side R, be sure to move
the Locker R after installing.
Locker R
Cassette Side R
2-4: LINK UNIT (Refer to Fig. 2-4)
1. Set the Link Unit to the Eject position.
Unlock the support 1.
2.
3. Remove the (A) side of the Link Unit first, then remove
the (B) side.
Main Chassis
Link Unit
(A)
2-5: LINK LEVER/FLAP LEVER (Refer to Fig. 2-5)
Extend the support 1.
1.
2. Remove the Link Lever.
3. Remove the Flap Lever.
1
B2-1
Check if this position
is locked.
Fig. 2-3-B
(B)
Link Unit
Main Chassis
Fig. 2-4
Flap Lever
Link Lever
Fig. 2-5