Table of Contents
Advertisement
5.4.2
Chipset
The Chipset configuration menu allows you to change advanced chipset settings.
Select an item then press <Enter> to display the sub-menu.
Advanced
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
NorthBridge Configuration
Uncore Configuration
Advanced
Uncore Configuration
IMC : ClarksField
Memory Remap Feature
PCI MMIO Allocation: 4GB To 3072MB
DRAM Frequency
Configure DRAM Timing vy SPD
DRAM Margin Ranks
MRC Serial Debug Message Level [Disabled]
Spread Spectrum
Memory ECC Function
Double Rate Refresh
Page Policy
Adaptive Page
Data Scramble
Memory Thermal Throttling
Memory Remap Feature [Enabled]
Setting this item to [Enabled] allows you to remapp the overlapped PCI memory
above the total physical memory. Configuration options: [Disabled] [Enabled]
DRAM Frequency [Auto]
You may allow the system to detect DDR3 memory frequency via SPD or designate
a specific frequency.
Configuration options: [Auto] [800 MHz] [1066 MHz] [1333 MHz]
Refer to the memory AVL on ASUS website at www.asus.com.
5-18
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
BIOS SETUP UTILITY
[Enabled]
[Auto]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Auto]
[Closed]
[Disabled]
[Enabled]
[Disabled]
Configure North Bridge
features.
Select Screen
←→
Select Item
↑↓
Enter Go to Sub Screen
F1
General Help
F10
Save and Exit
ESC
Exit
To transition the CSI
links to full-speed
or leave them in
slow-mode.
Select Screen
←→
Select Item
↑↓
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Chapter 5: BIOS setup
Advertisement
Table of Contents
