Table of Contents
Advertisement
6.3.5
Recovery Volume Options
If you have created a recovery set, you can configure more recovery set options
following the descriptions in the section.
See section 6.3.2 Creating a Recovery set to create a recovery set before
continue.
To configure a recovery set
From the utility main menu, select 4. Recovery Volume Options and press
1.
<Enter>. The following screen appears.
Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5
Enable Only Recovery Disk - enables recovery disk if available and
Actions will result in change from Continuous Update mode to On-Request.
[↑↓]-Select
2.
Use the up/down arrow key to select the option you want, and then press
<ENTER>. The SELECT RECOVERY VOLUME screeen appears.
Name
Volume0
3.
Use the up/down arrow key to select a drive, and then press <Space>
to select. A small triangle marks the selected drive. Press <Enter> after
completing your selection and return to the utility main menu.
6-30
Copyright(C) 2003-09 Intel Corporation.
[
RECOVERY VOLUME OPTIONS
1.
Enable Only Recovery Disk
2.
Enable Only Master Disk
disables master disk.
Enable Only Master Disk - enables master disk if available and
disables recovery disk.
[ESC]-Previous Menu
[ SELECT RECOVERY VOLUME ]
Level
Capacity
Recovery(Cont.)
Select a Recovery volume to do the operation.
[ ↑↓ ]-Up/Down [SPACE]-Selects [ENTER]-Done
All Rights Reserved.
]
[
HELP
]
[ENTER]-Select
Status
Bootable
149.0GB
Normal
Yes
Chapter 6: RAID configuration
Advertisement
Table of Contents
