Asus RS300-E6 Series User Manual page 129

2. Enter a name for the recovery set and press <Enter>.
When the RAID Level item is selected, press the up/down arrow key to select
3.
Recovery, and then press <Enter>.
When the Disks item is selected, press <Enter> to select the hard disk drives
4.
you want to include in the recovery set. The SELECT DISKS screen appears.
Port Drive Model
0 ST3160812AS
1 ST3160812AS
2 ST3160812AS
3 ST3160812AS
Select 1 Master and 1 Recovery disk to create volume.
[ ↑↓ ]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery [ENTER]-Done
5. Use the up/down arrow key to select a drive, press <TAB> to select a Master
disk, and then press <SPACE> to select a Recovery disk. A small triangle
marks the selected drive. Press <Enter> after completing your selection.
When the Sync item is selected, use the up/down arrow key to select a sync
6.
option that you want and press <Enter>.
When the Create Volume item is selected, press <Enter>. The following
7.
warning message appears.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
8. Press <Y> to create the recovery set and return to the main menu, or <N> to
go back to the CREATE VOLUME menu.
If a recovery set is created, you cannot add more RAID sets even when you
have more non-RAID disks installed in your system.
ASUS RS300-E6 Series
[ SELECT DISKS ]
Serial # Size
9LS0HJA4 149.0GB
9LS0F4HL 149.0GB
3LS0JYL8 149.0GB
9LS0BJ5H 149.0GB
Status
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
6-27