Table of Contents
Advertisement
6.3.1
Creating a RAID set
To create a RAID set
From the utility main menu, select 1. Create RAID Volume and press
1.
<Enter>. The following screen appears.
Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5
Copyright(C) 2003-09 Intel Corporation.
Enter a unique volume name that has no special characters and is
[↑↓]Change
2.
Enter a name for the RAID set and press <Enter>.
When the RAID Level item is selected, press the up/down arrow key to select
3.
a RAID level to create, and then press <Enter>.
When the Disks item is selected, press <Enter> to select the hard disk drives
4.
you want to include in the RAID set. The SELECT DISKS screen appears.
Port Drive Model
0
ST3160812AS
1
ST3160812AS
2
ST3160812AS
3
ST3160812AS
Select 2 to 6 disks to use in creating the volume.
[ ↑↓ ]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done
5.
Use the up/down arrow key to select a drive, and then press <Space>
to select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
ASUS RS300-E6 Series
[
CREATE VOLUME MENU
Name:
Volume0
RAID Level:
RAID0(Stripe)
Disks:
Select Disks
Strip Size:
128KB
Capacity:
0.0
GB
Sync:
N/A
Create Volume
[
HELP
16 characters or less.
[TAB]-Next
[ESC]-Previous Menu
[ SELECT DISKS ]
Serial #
Size
9LS0HJA4
149.0GB
9LS0F4HL
149.0GB
3LS0JYL8
149.0GB
9LS0BJ5H
149.0GB
All Rights Reserved.
]
]
[ENTER]-Select
Status
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
6-25
Advertisement
Table of Contents
