Table of Contents
Advertisement
5.3
Main menu
When you enter the BIOS Setup program, the Main menu screen appears, giving
you an overview of the basic system information.
Refer to section 5.2.1 BIOS menu screen for information on the menu screen
items and how to navigate through them.
Main
Advanced
System Time
System Date
SATA 1
SATA 2
SATA 3
SATA 4
SATA 5
SATA 6
Storage Configuration
System Information
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
5.3.1
System Time [xx:xx:xx]
Allows you to set the system time.
5.3.2
System Date [Day xx/xx/xxxx]
Allows you to set the system date.
5.3.3
SATA1—6
While entering Setup, the BIOS automatically detects the presence of IDE/SATA
devices. There is a separate submenu for each IDE/SATA device. Select a device
item then press <Enter> to display the SATA device information.
Main
SATA1
Device
:Hard Disk
Vendor
:xxxxxxxxx
Size
:xx.xGB
LBA Mode
:Supported
Block Mode:16Sectors
PIO Mode
:4
Async DMA :MultiWord DMA-2
Ultra DMA :Ultra DMA-6
S.M.A.R.T.:Supported
Type
LBA/Large Mode
Block(Multi-Sector Transfer)M [Auto]
PIO Mode
DMA Mode
SMART Monitoring
32Bit Data Transfer
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
ASUS RS300-E6 Series
BIOS SETUP UTILITY
Server
Power
[13:44:30]
[Wed, 07/22/2009]
:
[ST3160812AS]
:
[Not Detected]
:
[Not Detected]
:
[Not Detected]
:
[Not Detected]
:
[Not Detected]
BIOS SETUP UTILITY
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
Boot
Tools
Exit
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
←→
↑↓
+-
Tab
F1
F10
ESC
Select the type
of device connected
to the system.
←→
↑↓
+-
F1
F10
ESC
Select Screen
Select Item
Change Field
Select Field
General Help
Save and Exit
Exit
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
5-9
Advertisement
Table of Contents
