Part Names And Functions - Mitsubishi Electric PRH-P8MYA Technical & Service Manual

4

PART NAMES AND FUNCTIONS

Unit
• Return air : Sucks the ambient air in.
• Supply air : Blows the air back out into
Remote controller (PAR-20MAA)
• Once the controls are set, the same operation mode can be repeated by simply pressing the ON/OFF button.
[Operation buttons]
1
[Room temperature adjustment] Button
2
[Timer/continuous] Button
3
[Selecting operation] Button
4
[Time selection] Button
[Time-setting] Button
5
[Louver] Button (This button does not operate in this model)
6
[Fan speed adjustment] Button
7
[Up/down airflow direction] Button (This button does not operate in this model)
8
[Ventilation] Button
9
[Checking/built-in] Button
0
[Test run] Button
1
[Filter] Button (This button does not operate in this model)
2
[ON/OFF] Button
3
Position of built-in room temperature
• Never expose the remote controller to direct sunlight. Doing so can result in the erroneous measurement of room tem-
perature.
• Never place any obstacle around the lower right-hand section of the remote controller. Doing so can result in the errone-
ous measurement of room temperature.
the room.
CENTRALLY CONTROLLED
CHECK
STAND BY
DEFROST
1 TEMP.
2
3
TIMER SET
PAR-20MAA
Supply air
Return air
1Hr.
ON OFF
ßC
CLOCK
FILTER
CHECK MODE
ßC
TEST RUN
ERROR CODE
FUNCTION
NOT AVAILABLE
ON/OFF
FILTER
CHECK TEST
4 5 6 8 7 9
- 7 -
2
1
0
3