Table of Contents
Advertisement
2
PART NAMES AND FUNCTIONS
G Indoor Unit
PEH-RP8MYA
PEH-RP10MYA
Air outlet
G Operation buttons
TEMP. ADJUSTMENT button
This sets the room temperature. The
temperature setting can be performed
in 1: units
Setting range
Cooling 19: to 30:
Heating 17: to 28:
TIMER button
This switches between continuous
operation and the timer operation.
OPERATION SWITCH button
Press this button to switch the cooling,
electronic dry (dehumidify), automatic
and heating modes.
LOUVER button
This switch the horizontal fan motion
ON and OFF.
(Not available for this model.)
Air intake duct flange
Air outlet duct flange
TIME SETTING button
This sets the current time, start time
and stop time.
CENTRALLY CONTROLLED
ON OFF
CLOCK
CHECK
˚C
STAND BY
ERROR CODE
DEFROST
TEMP.
TIMER SET
PAR-20MAA
VENTILATION button
This sets the ventilation fan speed.
- 3 -
Air intake
(sucks the air inside the room into the unit)
FAN SPEED button
This sets the ventilation fan speed.
ON/OFF button
This switches between the operation
and stop modes each time it is pressed.
The lamp on this button lights during
operation.
1Hr.
˚C
FILTER
CHECK MODE
TEST RUN
AIR DIRECTION button
NOT AVAILABLE
FUNCTION
ON/OFF
This adjusts the vertical angle of the
ventilation.
FILTER
(Not available for this model.)
CHECK TEST
FILTER button
This resets the filter service indication
display
CHECK-TEST RUN button
Only press this button to perform an
inspection check or test operation.
Do not use it for normal operation.
Advertisement
Table of Contents
