Telephone Operations; To Answer A Call; Making A Call; To End A Cal - Maxcom KXT480 User Manual

ENGLISH
1
2
3
4
5
6

TELEPHONE OPERATIONS

6.1

To answer a call

When the phone rings;
Lift the handset or press the SPEAKERPHONE button on the Base unit.
6.2

Making a call

1
2
6.3

To end a cal

Replace the Handset on the Base unit cradle or press the SPEAKERPHONE button
on the Base unit.
In standby mode, press SET/STO button.
The display shows ' SET 1 DATE '.
Press UP or DOWN button until the display shows 'SET 3 FLASH'.
Press SET/STO to confirm.
Press UP or DOWN button to select 100 (default),300, 600, or 1000.
Press SET/STO button to confirm the setting. The display shows ' SET 1
DATE ' , you can continue with programming
,or press DELETE button to return standby mode.
The Call timer starts after going on line.
Lift the Handset, listen for a dial tone
The display shows ' 00-00 '.
Dial the telephone number you wish to call.
The display shows the number as you 14 digits dia l(maximum of
will be shown).
To end the call, return the Handset to the Base unit.
The SPEAKERPHONE light indicator will turn OFF.
18