Insignia NS-DRVCR User Manual page 29

Time searching
You can select the start point of the title.
To select the starting point of the title:
1 Press /
TITLE LIST menu, then press ENTER. The
options appear on the left side of the menu.
2 Select Search, Time, then press ENTER.
The Time menu opens.
Selected time
Start time
3 Press / to find the point at which you
want to start. The point increases 1 minute
per step.
If you press and hold
increases 5 minutes per step.
4 Press ENTER to start at the selected point.
Moving a playlist chapter
Use this function to re-arrange the playing order
of playlist chapters on the Chapter List-Playlist
menu (not available if there is only one chapter).
To move a playlist chapter:
1 Select a chapter on the Chapter List-Playlist
menu, then press ENTER. The menu options
appear on the left side of the menu.
2 Press / to select Move from Playlist
options, then press ENTER.
3 Press /
want to move the chapter, then press
ENTER. The updated menu opens.
Hiding a chapter or title
You can skip playing chapters or titles without
deleting them from the disc.
To hide a chapter or title:
1 Press /
title you want to hide on the TITLE LIST or
Chapter List menu, then press ENTER. The
options appear on the left side of the screen.
2 Select Edit, then Hide.
28
/ to choose a title on the
End time
Selected point
Current
picture
/ , the point
-RW
VR
/ to choose the place you
+RW
+R
/ to choose a chapter or
www.insignia-products.com
NS-DRVCR DVD Recorder/VCR
3 Press ENTER to confirm. The chapter's or
title's thumbnail will dim.
Tip
If you select a hidden chapter or title on the
TITLE LIST or Chapter List menu, you can
show it by choosing Show on the options
menu. After that, you can see the chapter or
title.
Protecting a title
+RW
Use this function to protect against accidental
rerecording, editing, or deleting of the title.
To protect a title:
1 Press DISC MENU/LIST. The TITLE LIST
menu opens.
2 Press /
want to protect, then press ENTER. Options
appear on the left side of the screen.
3 Select Protect from the options.
4 Press ENTER to confirm. The lock mark
appears on the title's thumbnail.
Tip If you select a title that has already been
protected on the Title List menu, you can
'unprotect' it by choosing the Unprotect
option from the Title List menu options, then
you can edit and delete the title.
Dividing one title into two
Use this command to split a title up into two new
titles.
To divide a title into two:
1 On the Title List menu, select a title you want
to divide, then press ENTER. The menu
options appear on the left side of the screen.
2 Select Edit, Divide, then press ENTER. The
Edit (Divide) menu opens.
Current picture
3 Use PAUSE, STEP, SEARCH, and
SLOW-MOTION to find the point at which you
want to divide the title.
4 Select Divide from the options, then press
ENTER.
To reset the point, select Cancel from the
options, then press ENTER. Repeat from
step 3.
5 Choose Done from the options, then press
ENTER to set the dividing point. The title is
divided into two new titles.
It takes as much as 4 minutes to divide.
+R -RW
VR
/ to select the title you
+RW
First title
thumbnail
Second
title
thumbnail