Insignia NS-DRVCR User Manual page 17

Menu Available settings
Language Display Menu–You can select a
language for the setup menu and
Settings
information display.
Disc Menu–You can select a language
for the DVD menu.
Disc Audio–You can select a language
for the DVD audio.
Disc Subtitle–You can select a language
for the DVD subtitle.
Audio Dolby Digital/DTS/MPEG–You can
select Bitstream (if you connect to
Settings
equipment with Dolby Digital, DTS, or
MPEG decoder), or PCM (to
automatically downmix to two-channel
PCM audio).
Sampling Freq.–You can select 96 kHz
or 48 kHz (if your receiver or amplifier is
not capable of decoding 96 kHz signals).
DRC ( Dynamic Range Control )–You
can set the DRC to On if you want to
listen to a movie at a lower volume,
without losing clarity.
Lock
Rating–You can select the rating
restrictions for your DVD player. Ratings
Settings
are 1–8 (1 is the most restrictive). When
you select this option, you must enter a
password.
Set Password–You can enter or change
your password.
Note: If you forget your password, you
can clear the password by going to the
Setup menu, selecting Start, then
pressing ENTER. Input the six-digit
number (210449), select OK when the
message appears, then press ENTER.
The password is cleared.
Area Code–You can enter the area code
whose standards were used to rate the
DVD (see "Area code list" on page 31).
Recording Disc Record Mode–You can set the
picture quality for recording a DVD.
Settings
(XP=excellent, SP=standard, LP= low,
EP=extended.)
VCR Record Mode–You can set the
picture quality for recording a video tape.
(SP=standard, SLP=long play.)
DV Record Audio–You can set this to
choose which of two digital camcorder
soundtracks to use. Audio 1 (to use the
sound that was recorded when a
recording was made), or Audio 2 (to use
the overdubbed sound).
Auto Chapter–You can set the auto
chapter markings (made during
recording) to 5 minute intervals, 10
minute intervals, or None.
16
Menu
Disc
Settings
The on-screen display
Some DVDs require specific operation or allow
only limited operation during playback. When
this occurs,
not available.
Displaying information while watching TV
While watching TV, press DISPLAY to display or
remove the information displayed on-screen.
In the example a DVD-RW in VR mode is
inserted.
Disc name
and format
www.insignia-products.com
NS-DRVCR DVD Recorder/VCR
Available settings
Initialize–Formats a DVD for recording.
For DVD-RWs, you can choose VR Mode
or Video Mode. For DVD+RWs you can
choose OK.
Caution: If you change the format of a
DVD, the disc is erased.
Finalize–Fixes the recordings in place so
the DVD can be played on a regular DVD
player or a computer with a suitable
DVD-ROM drive.
Caution: If you finalize a DVD-R or
DVD+R, you cannot edit or record
anything else on the disc.
Disc Label–You can enter a name for the
DVD. See "Naming a title" on page 27 for
information on using the Keyboard menu.
Disc Protect–You can protect recordings,
depending on the type of DVD you are
using. For DVD+RWs, it prevents editing,
erasing, overwriting, or regular recording.
For DVD+Rs or DVD-RWs (VR mode), it
prevents editing, erasing, and regular
recording. It is not compatible with
DVD-RWs in Video mode or DVD-Rs. To
unlock a DVD, select OFF.
AutoPlay–Turning this ON will bypass
the Disc menu and trailers and start
playing the movie automatically.
®
About DivX –Provides you with a
registration code that lets you rent and
purchase videos using the DivX VOD
service. For more information, visit
www.divx.com/vod.
Note: The videos downloaded from DivX
VOD can only be played back on your
recorder.
is displayed, action prohibited or
Record mode, free
Channel number
space, and elapsed time and audio input
Audio output Date and time
Operational mode of recorder