Page 2
Audio, as well as your appreciation for the sound of this high-quality device, will be rewarded by its excellent operation for years to come. Please read this entire manual before you connect the L-5000 DHT Line Stage Preamplifier to the other components of your system and the wall outlet.
___________________________________________________________________ WARRANTY ___________________________________________________________________ FIGURES Please read about SAFETY before you attempt to use the L-5000 DHT Line Stage Preamplifier - we care about our customers and the equipment, and we want you to enjoy this product for a long time!
L-5000 DHT triode (DHT) based preamplifier. The main breakthrough, preamplifier. ONLY A LIMITED NUMBER OF UNITS OF THIS which came after several years of work applying all he DESIGN WILL BE MADE.
Page 5
10,000 hours. an "L" shaped output impedance curve. Please compare the two graphs below, especially for low The L-5000 DHT is Allnic Audio’s best line stage frequency response. preamplifier. Like all Allnic Audio products, it uses Permalloy (Iron and nickel alloy) for its transformer ...
We advise that you keep the box and other packing INITIAL SET-UP materials that your L-5000 DHT came in. It will be useful if you sell your L-5000 DHT or in the unlikely event you need LOCATION, LOCATION, LOCATION to ship it for service.
You will need a phono preamplifier if The remote control provides the ability to remotely: you want to use a turntable with the L-5000 DHT. You can connect your phono preamplifier to any of the five inputs, ...
Mute button. After about forty (40) seconds, the light At this point, you can power on your stereo power above the “operate”/”mute” button will illuminate. amplifier or mono-blocks. The L-5000 DHT has a “soft start” delay for the tubes in order to extend tube life. OPERATION ...
TUBES or MR0 TS8 x 2 (1 gain stage); 3A/109B × 2 (2 – The L-5000 DHT uses the following tubes (see Figure 6): output - gain stage – equivalents are CV1671 Two (2) x 6AK6 or 6485 and 4021a;...
For the warranty to be valid, a defective product must be returned to Hammertone Audio for service prior to any unauthorized attempt to repair. Any repair work on an Allnic Audio product not specifically authorized by Hammertone Audio will void the warranty on the product.
Need help?
Do you have a question about the L-5000 DHT and is the answer not in the manual?
Questions and answers