Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Other surfaces of the appliance
may become hot enough to cause burns
including oven vent openings and surfaces
near these openings, oven doors, and
windows of oven doors.
Grounding Instructions
Avoid fire hazard or electrical
shock. Do not use an adapter plug, and
extension cord, or remove grounding prong
from the power cord. Failure to follow this
warning may cause serious injury, fire, or
death.
This appliance is equipped with a three-
prong grounding plug. For your protection
against shock hazard, it should be plugged
directly into a properly grounded receptacle.
Do not cut or remove the grounding prong
from this plug.
For personal safety, this appliance must be
properly grounded. For maximum safety, the
power cord must be plugged into an elec-
trical outlet that is correctly polarized and
properly grounded.
If a two-prong wall receptacle is the only
available outlet, it is the personal responsi-
bility of the consumer to have it replaced
with a properly grounded three-prong wall
receptacle installed by a qualified electri-
cian.
Grounding type
Do not cut, remove, or
wall receptacle
bypass the grounding
plug under any
circumstances.
See the installation instructions packaged
with this appliance for complete installation
and grounding instructions.
Read all instructions before using this appliance.
Power supply cord
with 3-prong
grounding plug
Save these instructions for future reference.
This appliance allows for conversion to
Liquefied Petroleum (L.P.) Gas.
Conversion to L.P. Gas
Personal injury or death from
electrical shock may occur if the conversion
to L.P. gas is not made by a qualified
installer or electrician.
Any additions, changes or conver-
sions required in order for this appliance to
satisfactorily meet the application needs
must be made by a qualified technician.
If L.P. conversion is needed, contact your
local L.P. Gas provider for assistance. The L.P.
conversion kit is provided with this appliance
and is located on the lower REAR (back side)
panel of the range. Before installing the kit
be sure to read the L.P. Installation Instruc-
tions and follow them carefully when making
the installation.
Product Record: You may find the model and serial
number printed on an identification label. The label
is located on the lower right of the oven frame.
Open the drawer to see the serial label.
Serial Plate Location
To locate the serial plate open the oven door. The
serial plate is located on the left side of the oven
frame. oven frame.
Record the date of purchase, model and serial
number of your product in the corresponding space
below.
Model Number:_____________________________
Serial Number:_____________________________
Date of Purchase: ___________________________
Save your sales receipt for future reference.
7
Advertisement
Table of Contents
