Advertisement
USING YOUR DVD PLAYER
Powering your DVD player
1 Make sure that your DVD player is connected to power.
2 Press the
(power) button on the front of your DVD player, or on the remote control, to turn
it on.
3 The start-up picture (DVD VIDEO) appears on the screen.
4 Press the
(power) button on the front of your DVD player, or on the remote control, to turn
it off.
Playing a DVD or audio CD
1 Press the
(open/close) button on the front of your player, or on the remote control, to open
the disc tray.
2 Place a disc, label side up, in the disc tray, then close the tray. The disc starts playing
automatically.
Controlling DVD or audio CD playback
• Press
(STOP) once to stop playback. Your DVD player remembers where you stopped. If you
press
, your DVD player starts playing at the point where you stopped.
• Press
(STOP) twice to stop playback. If you press
, your DVD player starts playing at the
beginning of the disc.
• Press
to pause playback. Press this button again to resume playback.
• Press
to fast-forward the disc. Each time you press this button, the fast-forward speed
changes from 2 to 4 to 8 to 16 to 32 times the normal speed.
• Press
to fast-reverse the disc. Each time you press this button, the fast-reverse speed
changes from 2 to 4 to 8 to 16 to 32 times the normal speed.
• Press
(NEXT) to go to the next title, chapter, or track.
• Press
(PREV) to go to the previous title, chapter, or track.
Adjusting the volume
• Adjust the volume of playback by turning it up or down on your TV, stereo system, or home
theater.
For information about using the Setup menus see your online User Guide.
TROUBLESHOOTING
No sound or distorted sound.
• Adjust the volume on your TV, monitor. or amplifier.
• Make sure that the sound in not muted.
• Make sure that all cables are inserted correctly into the appropriate jacks. Make sure that the
sound in not muted on your TV , monitor, or amplifier.
Disc does not play.
• Make sure that the disc is inserted with the label side up.
• Make sure that the disc is compatible with your DVD player. Your DVD player can play region
code 1 DVDs and audio CDs. Blu-ray and 3D discs will not play.
• Make sure that the correct input is selected on your TV or monitor.
Play starts, then stops immediately.
• Make sure that the region code for a DVD matches the region code for your DVD player. Your
DVD player's region code is 1. The DVD's region code is on the DVD or the DVD packaging.
• Make sure that the disc is not dirty.
• If condensation has formed inside your DVD player, let your DVD player dry out.
SPECIFICATIONS
Compatible discs
Compatible discs: CD Digital Audio 12cm, CD-R, CD-RW, DVD-Video
12cm, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL Dual Layer, DVD+R
Dual Layer. Does not support Blu-ray, 3D
Signal system
NTSC
Video output
Electrical output:1.0±0.2V
Resistance: 75 ohms Unbalanced negative
Audio S/N
Equal to or better than 80 dB
Dynamic range
Equal to or better than 80 dB
Wave length
650 nm/795 nm
Power source
110-240 V ~ 50/60 Hz 10W
Weight
2.2 lbs. (1.0 kg)
Dimensions (W × H × D)
10.24 × 7.28 × 1.50 in. (260 × 185 × 38 mm)
SAFETY INFORMATION
• Do not use this apparatus near water.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
• To reduce the risk of fire or electric shock, do not expose this device to rain, moisture, dripping,
or splashing, and do not place objects filled with liquids, such as vases, on it.
LEGAL NOTICES
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China
V2 ENGLISH 17-0079
Advertisement
