Getting Started; Back Panel Connections - Bladelius EMBLA User Manual

Bladelius Embla
Getting started - Back panel connections

Getting started

Back panel connections

Analog Output
2. Left & Right Ch. Low
level output
1. Left & Right Ch. Normal
level output
R, L: Balanced output
Note! The USB device connected to the USB data port must be in FAT format to be recognized by Embla.
© 2009 by Bladelius Design Group. All rights reserved
Analog input Digital input
2. Left & Right Ch 4. TosLink
analog input Optical
1. Left & Right Ch 3. S/PDIF
analog input Coaxial
R, L: Balanced input 2. AES/EBU
1. USB
AC INLET
Mains power switch
IEC Connector
Fuse holder
Digital Output Communication
connectors
3. TosLink
Optical 12 Volt trigger output
2. S/PDIF 12 Volt trigger input
Coaxial IR input for external IR
1. AES/EBU receiver
RS232 Software and
control port
RJ45 Network port
USB data port
User Manual
1