Bladelius EMBLA User Manual page 6

Bladelius Embla
Unpacking
Placement
Cleaning
© 2009 by Bladelius Design Group. All rights reserved
When you have received your EMBLA, you should make
sure that the shipping box is in its original state. If however
that should not be the case, please contact your dealer.
Please unpack your unit carefully; there are several parts
that can be damaged. We suggest that you to keep your
box and its interior. Save your plastic bag, inserts, and
carton. You may need these later for transporting the
EMBLA or for shipment in the event it ever requires factory
service.
Record the serial number (on rear panel) here for future
reference: _____________________________________________
Record the MAC address (on rear panel) here for future
reference: _____________________________________________
Please make sure that your shipping box contains the
following:
1 pc BLADELIUS EMBLA
1 pc BLADELIUS MJÖLNER (remote control)
1 pc Power cord
1 pc User manual
The EMBLA functions best when placed on a flat, stable
surface. Never place the EMBLA near heat sources such
as radiators, stoves, fireplaces or other heat-producing
appliances. Avoid placing the EMBLA where it will be
subjected to direct sunlight or extremely low temperature.
Avoid placing the EMBLA near strong electromagnetic
fields, such as large power amplifiers. Placement of the
unit near these fields can lead to problems with hum.
To clean the unit, use only a soft tissue (Kleenex type).
Never apply abrasive cleaners to the outer surfaces of the
unit.
Note!
At no time should liquid cleaners be applied directly to the
EMBLA, as direct application of liquids may result in damage
to electronic components within the unit.
User Manual
v