Serial Number; Enable Media Sw Update; Start Network Sw Update; Touch-Screen Calibration - Bladelius EMBLA User Manual

Bladelius Embla
Reference - System settings

Serial number

This is the unique serial number of this Bladelius Embla.

Enable media SW update

This setting must be "On" to be able to update the primary software in Bladelius
Embla. Enable software updates should normally be off, except when you want
to update the software with an updated disc from Bladelius Design Group.
Options
Off *) Disable Embla from software updates.
On Enable software updates.

Start network SW update

Select this menu item to start downloading and updating the primary software in
Bladelius Embla, if new software version is available. Do not power off during
update unless instructed to do so. The update process could take several
minutes depending on the network connection.

Touch-screen calibration

You can calibrate the touch control to synchronize the position of the menus and
buttons to the touch sensors, by tapping the prompted marks. The touch control
is calibrated in the factory and is normally not needed to be recalibrated.
© 2009 by Bladelius Design Group. All rights reserved
User Manual
24