Backup A Cd To Usb Memory Device; Change Input Level; Change Source; Change Volume - Bladelius EMBLA User Manual

Bladelius Embla User Manual
Basic operation - Backup a CD to USB memory device
You can also start a backup of a CD from the menu by selecting the "Backup"
button under the setup menu.

Backup a CD to USB memory device

If you want CD's to backup to USB memory device you should change the setting
"Backup destination" to "USB".
Note! The USB device must be in FAT format!

Change input level

Select the input that you want to change.
Press "Time" button on the remote control, or select the "Information" button in
the setup menu on the display. Use volume+ and volume- buttons to change the
input level.

Change source

Use the source+ button on the remote control or the touchscreen to change to
next input.
Use the source- button on the remote control or the touchscreen to change to
previous input.

Change volume

Use the volume+ button on the remote control or the touchscreen to increase the
volume.
Use the volume- button on the remote control or the touchscreen to decrease the
volume.
It is only possible to change volume if "Bypass master volume" in "Audio settings"
is set to "Off".

Copy music from the internal memory to an external USB device

Press "Mem" button on the remote control, or the folder button on the
touchscreen. The system informs you to select the item you want to copy. Place
the cursor on the artist, album or track you want to copy and press enter, or
select directly with the touchscreen. The item is copied.
Note! The USB device must be in FAT format!
© 2009 by Bladelius Design Group. All rights reserved
8