Remove Prompt For Backup Of Inserted Cd; Skip Tracks Forward And Backward; Stop Playback Of Music; Update Embla Software - Bladelius EMBLA User Manual

Bladelius Embla
Basic operation - Remove prompt for backup of inserted CD

Remove prompt for backup of inserted CD

Change the setting "Backup query at CD insertion" in the "CD backup settings"
menu to "No".

Skip tracks forward and backward

Use the skip forward button to skip track and start playback of the next track.
Use the skip backward button to start playback from the beginning of the track, or
skip to the previous track.

Stop playback of music

Use the "Stop" button to stop playback.

Update Embla software

1. Set the setting "Enable software updates", in the menu "System settings"
page two, to "On".
2. Put in the CD with the new software into Embla.
3. Restart Embla (put Embla in and out of standby).
4. Wait for Embla to update itself.
5. The update process is finished when the CD is out and the normal
playback display is shown.

Use random playback mode

Press and hold the "Angle" button on the remote control to toggle random mode
between "All" and "Off", or change the setting "Random" in the "Playback
settings" menu.

Use repeated playback mode

Press the "Repeat" button on the remote control to toggle repeat mode between
"One" and "Off", or change the setting "Repeat" in the "Playback settings" menu.
© 2009 by Bladelius Design Group. All rights reserved
User Manual
12