Xerox WorkCentre 7525 User Manual page 14

Troubleshooting

Loading paper incorrectly.

Overfilling the tray.

Adjusting the paper guides improperly.
Most jams can be prevented by following a simple set of rules:

Use only supported paper. For details, see

Follow proper paper handling and loading techniques.

Always use clean, undamaged paper.

Avoid paper that is curled, torn, moist, creased, or folded.

Fan the paper to separate the sheets before loading it into the tray.

Remove transparencies from the output tray immediately after printing.

Observe the paper tray fill line; never overfill the tray.

Adjust the paper guides in all trays after inserting the media. A guide that is not properly adjusted
can cause poor print quality, misfeeds, skewed prints, and printer damage.

After loading the trays, select the correct paper type and size on the control panel.

When printing, select the correct type and size in the print driver.

Store paper in a dry location.
®

Use only Xerox
Avoid the following:

Paper that is specially designed for ink-jet printers with polyester coating.

Paper that is folded, wrinkled, or excessively curled.

Fanning transparencies before loading in the tray.

Loading more than one type, size, or weight of paper in a tray at the same time.

Loading punched paper or paper with folded corners or staples in the document feeder.

Overfilling the trays.

Allowing the output tray to overfill.

Allowing the output tray to fill with more than a few transparencies.
Refer to the control panel Paper and Media Information Pages for information on supported paper, or go
to www.xerox.com/paper.
224 WorkCentre 7500 Series Multifunction Printer
User Guide
paper and transparencies designed for the printer.
Supported Paper on page 38.