Sony SRW-5800 Operation Manual page 153

Item number Item
743 BLACK LEVEL
(ALL)
(HD/UC/SD/DC)
preset: 100%
(4000H)
755 MASTER LEVEL
(D1)
preset: 100%
(4000H)
756 Y LEVEL (D1)
preset: 100%
(4000H)
757 B–Y LEVEL (D1)
preset: 100%
(4000H)
758 R–Y LEVEL (D1)
preset: 100%
(4000H)
762 SETUP LEVEL
(CST)
preset: 7.5 IRE
763 SYNC PHASE (SD)
preset: 0
764 FINE (SD)
preset: 0
775 VIDEO OUTPUT
DATA
776 DOWNCONVERTER
INPUT CHECK
ENABLE
Setting Function
–31.0% (0H) Adjusts the black level of HD, UC, SD, and DC output.
Note
The range of control possible from the HKDV-900/503 is
–8.0% to 8.0%.
31.0% (220H)
0.0% (0H) Adjusts the level of the D1 video signal output from SD SDI
OUT. Simultaneously adjusts the Y, B–Y, and R–Y level.
141.3% (5A70H)
0.0% (0H) Adjusts the level of the D1 video signal output from SD SDI
OUT. Adjusts the Y level of the video signal.
141.3% (5A70H)
0.0% (0H) Adjusts the level of the D1 video signal output from SD SDI
OUT. Adjusts the B–Y level of the video signal.
141.3% (5A70H)
0.0% (0H) Adjusts the level of the D1 video signal output from SD SDI
OUT. Adjusts the R–Y level of the video signal.
141.3% (5A70H)
0.0 Adjusts the setup level of the analog composite video
signal output from SD OUT COMPOSITE (MONITOR)
connector.
[7.5]
10.0
–128 Adjusts the sync phase of the D1 video signal output from
SD SDI OUT and analog composite video signal output
from SD OUT COMPOSITE (MONITOR) connector.
[0]
127
[0]
Makes fine adjustments to the sync phase of the D1 video
signal output from SD SDI OUT and analog composite
video signal output from SD OUT COMPOSITE
1024
(MONITOR) connector.
8bit Sets the bit size of the output data from the HD-SD
[10bit] converter.
8bit: When connected to an 8-bit system
10bit: When connected to a 10-bit system
Note
Make sure the bit length matches the destination device.
[disable]
Selects the HD-SD converter mode when the INPUT
enable CHECK button on the control panel is pressed.
disable: The INPUT CHECK button is not linked to HD-SD
enable: The INPUT CHECK button is linked to HD-SD
Note
The INPUT CHECK button works for all of the HD-SD
converter output connectors.
converter output.
converter output.
153
Menu List