Sony SRW-5800 Operation Manual page 160

Item number Item
DIGITAL OUT CH12 TR1
836 SD AUDIO
OUTPUT
EXCHANGE
Sub items
SDOUT EXCG
SD OUT CH1
SD OUT CH2
SD OUT CH3
SD OUT CH4
SD OUT CH5
SD OUT CH6
SD OUT CH7
SD OUT CH8
840 AES/EBU INPUT
MODE
160
Menu List
Setting Function
[TR12]
Makes independent track selections for the audio (channels
1 to 8) to be multiplexed into SD SDI.
[disable]
disable: Follow the settings of DIGOUT EXCHNG menu
enable
enable: Enable the settings of this menu.
[TR1] Specifies the signal tracks to assign to audio channels 1 to
8 for multiplexing with SD SDI output.
TR12
TR1
[TR2]
TR12
TR1
[TR3]
TR12
TR1
[TR4]
TR12
TR1
[TR5]
TR12
TR1
[TR6]
TR12
TR1
[TR7]
TR12
TR1
[TR8]
TR12
[AUTO]
When recording in the HDCAM-SR format, specifies
48K VLOCK whether to pass signals input to the DIGITAL I/O (AES/
EBU) INPUT connector through the sampling rate
converter.
AUTO: Input signals pass through the sampling rate
48K VLOCK: Input signals do not pass through the
CH1 to CH8.
converter. In this case, there are no limitations on input
signals.
sampling rate converter. In this case, input signals
must be locked to video signals at 48 kHz. Noise will
occur if this condition is not met.