Table of Contents
Advertisement
5.
Include vibration-free periods each
day of work.
6.
Grip tool as lightly as possible (while
still keeping safe control of it). Let
the tool do the work.
7.
To reduce vibration, maintain tool as
explained in this manual. If abnormal
vibration occurs, stop immediately.
SAVE THESE
INSTRUCTIONS.
SKU 92353
For technical questions, please call 1-800-444-3353.
FUNCTIONAL DESCRIPTION
Specifications
Maximum Air Pressure
Air Inlet
Drive Size
Maximum Speed*
Maximum Torque
Torque Range
Average Air Consumption 6.3 SCFM @ 90 PSI
Blows Per Minutes (BPM) 1400
Standard Bolt Size
Recommended Hose
* Maximum speed at stated maximum air pressure.
Excess air pressure is hazardous and may cause the
tool to exceed stated maximum speed.
INITIAL TOOL SET UP/
ASSEMBLY
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Unpacking
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
• This air tool may be shipped with a
protective plug covering the air inlet.
Remove this plug before set up.
90 PSI
3/8" -18 NPT
3/4" Square Drive
4800 RPM
1400 ft-lb
300-1100 ft-lb
1-3/16"
3/8"
REV 10b
Page 6
Advertisement
Table of Contents
