Page 1
Copyright 2006 by Harbor Freight Tools or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353. Manual Revised 11h ”...
Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI-approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. SKU 94803 For technical questions, please call 1-800-444-3353 Specifications 425 ft-lb ”...
Page 3
20. Compressed air only. use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool. SKU 94803 For technical questions, please call 1-800-444-3353 Use clean, dry regulated, compressed air at 90 PSI. Never...
When unpacking, check to make sure the parts listed on page 8 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Page 5
Use other appropriate methods and tools to loosen the nut. When the nut is loosened, release the Trigger (11). Turn off the air compressor and disconnect the hose. If needed, remove the nut from the socket. SKU 94803 For technical questions, please call 1-800-444-3353 Operation (continued) Page 5...
FIGURE 1 Valve Knobs Left Valve Knob Push Knob in for REVERSE Turn the Valve Knob (3) for more air flow and more power. SKU 94803 For technical questions, please call 1-800-444-3353 Maintenance Air Inlet (10) FIGURE 2 Anvil...
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 94803 For technical questions, please call 1-800-444-3353 Parts List Qty.
Page 8
Assembly Diagram and Warranty 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.